The Cessna 152 is an American two-seat, fixed tricycle gear, general aviation airplane, usedprimarily for flight training and personal use. It was based on the earlier Cessna 150, includinga number of minor design changes and a slightly more powerful engine running on 100LLaviation gasoline.First delivered in 1977 as the 1978 model year, the 152 was a modernization of the provenCessna 150 design. The 152 was intended to compete with the new Beechcraft Skipper andPiper Tomahawk, both of which were introduced the same year. Additional design goals wereto improve useful load through a gross weight increase to 1670 lbs (757 kg), decrease internaland external noise levels and run better on the then newly introduced 100LL fuel.As with the 150, the great majority of 152s were built at the Cessna factory in Wichita, Kansas.A number of aircraft were also built by Reims Aviation of France and given the designationF152/FA152.Production of the 152 was ended in 1985 when Cessna ended production of all of their lightaircraft; by that time, a total of 7,584 examples of the 152, including A152 and FA152 Aerobataerobatic variants, had been built worldwide.
I will usually print this in Blue and White, and if you would like it printed in another color, just let me know at time of order, any and all questions are welcome. I can print any plane in any color from 3DLabPrint
If I have it in stock, it will ship out the next business day, Otherwise I need 4-6 days to print and ship out
Length: 1220 mm / 48,0 inchWingspan: 1563mm / 61.5 inchHeight: 384 mm / 15.1 inchWing area: 36 dm2 / 3.9 sq footWing loading: 54 g/dm2 / 17.70 oz at sq footCenter of gravity: 75 mm (0 in) from leading edge See CG tags on wings...Airfoil: 3DLabPrint modifiedPrint weight: 1374 g / 48.5 ozEmpty weight (w/o battery): 1724 g / 60.8 ozTakeoff weight (3s 3000 lipo): 1944 g / 68,6 ozMax takeoff weight: 2250 g / 79.4 ozNever exceed speed, VNE: 100 km/h / 62.14 mphDesign maneuvering speed, VA: 70 km/h / 43.49 mphStall speed, VS(full flaps): 24 km/h / 14.9 mph
Recommended setupPropeller: APC 11x5,5Motor: Turnigy 3542/5 1000-1250KV or similarESC: 40A Electronic Speed Controller or similar 40AmpsBattery: Li-Pol 3000mAh/3s/4s (11.1V), at least 215g / 7.6oz, 25C
You will need: CA Glue - medium or similar medium viscosity CA glue Activator for CA Glue or similar, but gas presurized aerosol is betterSnap knifeSoldering Iron or any hot tool1 mm / 18 AWG pushrod wires Wire cutter, Z bend pliers or pliers1.5mm / 16 AWG pushrod wires for flaps only (use any steel wire)7x Mini servo TR-1160A or simmilar Hitec 82/81 classMotor setup with ESCServo wire extenders approx 300mm (2 pieces from package)Your own Rx/Tx systemBattery for your setup...Adhesive velcro strip for Li-Pol battery and ESCPropeller 11x5,5Scale markings printed on adhesive foilServo wire extenders approx 300mm (2 pieces from package)
Includes:all printed parts for modelPDF file of decalsPrinted user guide
More details for the model can be found at 3d LabPrint's website: www.3dlabprint
Returns:
If you're not happy with the model I will accept returns as long as it's complete, and totally unassembled. If there's damage during shipping I will send you the parts you need free of charge. Also if you have a hard landing and need replacement parts, just contact me and i can get you a quote for the parts you may need.